Polyvinyl butyral - epoxy-resin based, two component, reaction-dry, anti-corrosive pigments containing anticorrosive primer to protect steel, aluminum and galvanized surfaces against corrosion, and to increase the adhesion of the top coat paints to be applied.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . Bevel the 90° sharp corners and edges of the application surface and send the surface at minimum Sa2 ½ (ISO 8501-1, SSPC-SP10) degrees, (sand - grid scraper) and prime the scraped surface in 1 to 2 hours with Wash Primer. After the primer has hard dried (in 4 to 6 hours), the top coat paint can be applied. Mix the primer and the hardener in the given ratio until a homogeneous mixture is obtained. Rest the mixture for 2 to 3 minutes for preliminary reaction and apply with the recommended apparatuses. Continue stirring to prevent settling during longtime applications. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Application at temperatures near the dew point is not recommended. For the topcoat application wait for 24 hours between coats. Application Temperature: Min. +10°C / Max. + 30°C

Thinning / Blending Ratio
2A / 1B - Epoxy Thinner 5- 10% by weight

Coverage Area
12-13 m²/L; 11-12 m²/kg (15 - 20 µ DFT)

Drying Time
Touch dry in 20-30 minutes and hard dry in 24 hours.

Recommended Application Tools
Air - airless spray

15 kg Set (10 kg A + 5 kg B)

Related Products
Epoxy Zinc 45 Primer VIEW DETAIL
Rapid Primer VIEW DETAIL
Perla Industrial Primer VIEW DETAIL
Poli HT Kiln Primer VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.