Prof P-CP 2K

The application surface must be cleaned of all types of oil, dirt, dust and surface debris. If required, the surface must be cleaned with oil solvents to remove all oil and dirt. Application of the primer must start once the surface is thoroughly cleaned and dry. Concrete, marble, granite, raw wood, tiles, ceramics and all similar surfaces must be primed with a solvent-free epoxy primer. After adding component B (1 measuring cup) to component A (4 measuring cups), it is mixed with an electric mixer at low speed (up to 400 rpm) for 2-3 minutes until a homogeneous colour is obtained. The mixture should be applied to the prepared surface by spreading it with the help of a brush or epoxy roller. If thickness is desired, the 2nd layer should be applied after the 1st layer is dried. Drying time between layer is 18 to 24 hours. Full curing and physical and chemical resistance is achieved in 7 days.