This is a solvent-based, transparent and gloss wood protector. Suitable for use for decorative and protective purposes on interior and exterior wooden surfaces. With its special additive agents, it protects wood against mold, fungi and bacteria. Prevents penetration of water into the wood. Has high scratching and abrasion resistance. Has micro-porous structure, which enables aeration of the wood. Does not damage the natural look of the wood. It is not required to be wiped off as it creates a film layer on the surface.

Surface Preparation&Application
The wood should be fully cleaned from oil stains, dusts, old paints and varnish residues. After the surfaces are wiped with cellulosic thinner, it should be applied in 2 coats after waiting 12 hours between each coat.

Thinning / Blending Ratio
Ready to use.

Coverage Area
Approximately 8-12 m²/L for single coat depending on the absorbance of the wood.

Drying Time
Touch-dry in 1-3 hours and fully-dry in 12 hours.

Recommended Application Tools
Brush, roller or spray gun with a suitable vacuum system.

Package
0.75 L - 2.5 L - 15 L

Related Products
Wood&Wood Anti Aging Wood Varnish – Glossy, Water-Based VIEW DETAIL
Wood&Wood Anti Aging Teak Oil VIEW DETAIL
Politex Yacht Varnish VIEW DETAIL
Politex Decorative Matte VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.