The wood should be fully cleaned from oil stains, dusts, old paints and varnish residues. After the surfaces are wiped with cellulosic thinner, it should be applied in 2 coats after waiting 4 hours between each coat.
Thinning / Blending Ratio
Thin with water by 5%.
Approximately 12 m²/L for single coat depending on the absorbance of the wood.
Touch dry in 20-30 minutes and fully dry in 3-4 hours.
Recommended Application Tools
Brush and roller.
2.5 L - 15 L
Wood&Wood Anti Aging Wood Varnish – Semi-matte, Solvent-BasedVIEW DETAIL
Wood&Wood Anti Aging Wood Varnish – Glossy, Solvent-BasedVIEW DETAIL