This is a solvent-based, high-covering synthetic primer. Brush mark-free high quality primer for priming wood, chipboard, metal and plaster surfaces. Creates a proper and resistant layer under the finishing paint.

Surface Preparation&Application
On the application surface, the shootings should be burned and the old paint should be scraped and sanded, if any. Then filled with preferably Politex Wood Protector and primed with Polistar Synthetic Primer. On plaster surfaces; the surface should be repaired with Synthetic Paste and primed with Polistar Synthetic Primer. On metal surfaces; the surface should be primed with Polisan Antirust after removing the rust and oil. Recommended to be applied as 2 coats by waiting 6 to 8 hours between each coat.

Thinning / Blending Ratio
Thin with Polisan Synthetic Thinner by 10-15%.

Coverage Area
Approximately 11 m²/L on single coat.

Drying Time
At 20°C, the primer is touch-dry in 2 to 3 hours and hard-dry in 12 to 15 hours.

Recommended Application Tools
Roller and brush.

0.7 L - 2.5 L - 10 kg - 20 kg

Related Products
Exelans Textra VIEW DETAIL
A1 Water-Based Plaster Remover VIEW DETAIL
Ceiling Extra VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.