TSE

Poliroad Road Marking Paint Water Based

This is an acrylic emulsion, water-based road line paint. Matt paint that is used for marking all kinds of traffic lines and marks required on the road. Easily dries even at high humidity, low temperature and limited air circulation. It is resistant against wear. High-covering, environment-friendly, easier to use than solvent-based paints, safer in working conditions, easily cleanable after application. Adherence to old asphalt and concrete surfaces, and dirt resistance are much better than solvent-based paints.

Surface Preparation&Application
The corroding or chalking areas should be cleaned, dusted, and the surface should be dried. While using a roller, two coats should be applied. The given amount should be applied to the surface to achieve the requested performance.
Thinning / Blending Ratio
Ready to use. Can be thinned with water by 5-10%, if required.
Coverage Area
600 g/m² provided that 625±25 micron wet film thickness is preserved at each coat depending on the condition of the application surface.
Drying Time
At 20°C, the paint is touch-dry in 20 to 30 minutes, antidust-dry in 1 hour and hard-dry in 3 to 4 hours.
Recommended Application Tools
Air and airless spray, roller and brush.
Package
2.5 L - 25 kg
Related Products
Rapid Extra Paint VIEW DETAIL
Polidur Polyurethane Glossy Paint VIEW DETAIL
Unipox Epoxy Paint VIEW DETAIL
Poliroad Road Marking Paint Solvent Based VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.