Primer paint used under the finishing coat as a thermally cured alcyd-melamine resin paint developed specifically for protecting metal surfaces open to the elements. Has an excellent level of performance for all general industrial, machinery production, steel construction and metal protection.

Surface Preparation&Application
For new surfaces: New surfaces must be clean of grease and dirt and then sanded before painting. Metal surfaces must be sandblasted to a minimum degree of Sa21/2 and primed with kiln primer within the next six hours. Start finishing coat application after the primer dries completely. Sand lightly after prim. Rest for a minimum of 15 minutes before being kilned. It is recommended you keep in the kiln at 120ºC for 30 minutes. After mixing with thinner in the specified ratios, allow to rest for approximately 10-15 minutes for flash-off before application. Surface’s temperature must be a minimum of 10°C. Application at the condensation point of water (2-5°C) must be avoided.

Thinning / Blending Ratio
% 15-20 Kiln Thinner

Coverage Area
8-10 m²/kg (paint for a dry film thickness of -40 – 60 microns)

Drying Time
Kiln dry at 120°C: 20-30 minutes

Recommended Application Tools
Conventional air spray gun (air pressure 3-4 bar nozzle diameter 1.4-1.6 mm)

15 kg

Related Products
Epoxy Miox Barrier Primer VIEW DETAIL
Rapid Primer VIEW DETAIL
Unipur Anti-Corrosive Primer VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.