Styrene modified alkyd resin, fast-drying, semi-matte industrial paint primer with anticorrosive pigments.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . Metal surfaces must be sanded at minimum Sa2 ½ (ISO 8501-1, SSPC-SP10) (sand blasting), prime the sanded surface with Industrial Antirust Primer in 6 hours. Thin the product according to the application equipment, than mix thoroughly until it becomes homogenous. After the primer has fully dried (in 4 to 6 hours), the finishing coat paint can be applied. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Application at temperatures near the dew point is not recommended. For the topcoat application wait for 24 hours between coats. Application Temperature: Min. +10°C / Max. + 30°C

Thinning / Blending Ratio
One component / Polisel Cellulosic & Poli HRM thinner 15 - 20%

Coverage Area
6-7 m²/L or 4-5 m²/kg (50 - -60 µ DFT)

Drying Time
Touch dry in 20-30 minutes and hard dry in 24 hours.

Recommended Application Tools
Air - airless spray

Package
15 kg - 18 kg - 20 kg - 24 kg

Related Products
Alumastic VIEW DETAIL
Epocrete Coating Primer VIEW DETAIL
Epoxy Coating Primer VIEW DETAIL
Rapid Primer VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.