This is a tin- and tin compounds-free, chlorine-rubber binder-based, self-polishing, anti-fouling paint that is used on the underwater sections of the wood, polyester and steel sheet boats to prevent the formation of fouling and boring mechanisms.

Surface Preparation&Application
Before application, wash the surface with fresh water and rub down with waterproof sand paper. After sanding, the surface should be washed with fresh water again and then dried. The surface should be wiped with a lint-free cloth and Polisel Cellulosic Thinner. Infrastructure preparation, cleaning and leveling should be completed before priming with two coats of POLISEL chlorine-rubber based boat primer. The first layer should be applied with a soft brush. The application of the fouling paint may begin after a curing period of 6 to 8 hours for the second layer. Ultra anti-fouling paint can be applied in 3 coats with roller, brush or airless gun. A curing period of 6 to 8 hours is required between each coat.

Thinning / Blending Ratio
Used without thinning.

Coverage Area
6-7 m²/L

Drying Time
At 23℃, the paint is touch-dry in 1 hour, antidust-dry in 2 hours and hard-dry in 8 hours.

Recommended Application Tools
Roller, brush and airless paint gun.

Package
1 kg - 3.6 kg - 20 kg

Related Products
Epoxy Finishing Paint VIEW DETAIL
Marine&Marine Synthetic Boat Paint VIEW DETAIL
Marine&Marine Anti Aging Polylac Yacht Varnish VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.