Water-based finishing paint applicable on metal and pig iron for structural steel, which is perfectly resistant to corrosion and challenging climatic conditions.

Surface Preparation&Application
Application surfaces must be smooth, stable, dry and free of grease and stains. Coarse rust flakes must be removed from the surface with a scraper, wire brush or sandpaper. Stir the can thoroughly before application.directly onto the metal surface in 2 layers waiting 2-3 hours between coats.

Thinning / Blending Ratio
Ready for use. Thin with water by 5-10% of its volume if required.

Coverage Area
9-11 m²/L for a single coat

Drying Time
At 20°C, touch dry in 40 minutes and fully dry in 10-12 hours.

Recommended Application Tools
Apply with a brush or a spray gun.

Package
0.7 L - 2.5 L

Related Products
Cosmetika Diamond VIEW DETAIL
Polyester Sanding Sealer VIEW DETAIL
A1 Water-Based Plaster Remover VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.