TSE

Water-based, matte, environmentally friendly, odorless luxury plastic interior paint.

Surface Preparation&Application
All surfaces must be smooth, dry and cleaned of dirt and dust. Cavities and cracks should be filled and a uniform flat surface can be achieved by applying PERLA MACUN (Putty). If the surface has solvent based paint, TRANSFER ASTARI (Primer) should be applied. DOLGULU ASTAR should be applied on mineral based low absorbing non-dusting raw surfeces as a single coat. A-STAR, ELEGANS EXTRA ASTAR or POLİZOLAN should be applied on the surfaces which have the application of plaster to prevent dust emission. It should be applied to surfaces in two coats after 18-24 hours of application of primer. On between coats, should be waited at least 3 hours. The ambient and surface temperature should be between 5-30°C during application.

Thinning / Blending Ratio
Dilute 25-30% by volume with water.

Coverage Area
13-15 m²/L for a single coat

Drying Time
At 20°C, touch dry in 15 minutes and dust dry in 30 minutes. Wait at least 4 hours between coats. Takes 4 hours to dry hard.

Recommended Application Tools
Apply with a satin roller and brush.

Package
2.5 L - 7.5 L - 15 L - 20 kg

Related Products
Matplast Extra VIEW DETAIL
Matrix Semi-Matte VIEW DETAIL
Ambians Extra VIEW DETAIL
Elegans Anti Aging Semi-Matte VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.