A pure acrylic resin-based, two-component, reaction-drying, aliphatic isocyanate hardener cured matte topcoat acrylic paint developed for the outdoors requiring UV resistance.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . 90° pointed corner and edges on the application surface must be rounded out and surface must be sanded at minimum SA2 ½ level (ISO 8501-1, SSPC-SP10) (sand - grid blasting), and sanded surface must be primed with Epoxy Anti-corrosive Prime in 1 to 2 hours. After primer has dried (in 4 to 6 hours), Pur-Acryl Matte Paint can be applied. Primer and hardener in defined ratios is mixed thoroughly until it becomes homogenous. Rest the mixture for 2 to 3 minutes and apply with the recommended apparatus. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Do not apply near dew point. For the topcoat application wait for 24 hours between coats. Application Temperature: min +10 °C / max + 30 °C

Thinning / Blending Ratio
15-20%

Coverage Area
6-7 m²/L; 5-6 m²/kg

Drying Time
Touch Dry: 2 to 3 hours, Complete Dry: 24 hours

Recommended Application Tools
Air - airless spray

Package
Set: 20 kg - 3 kg - 1 kg

Related Products
Poli-Heat 300°C VIEW DETAIL
Industrial Finishing Paint VIEW DETAIL
Rapid Extra Paint VIEW DETAIL
Pur-Acryl Matte Varnish VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.