TSE

This is An acrylic co-polymer binder- and water-based, grain-textured exterior coat. It is resistant against humid air conditions, humidity and saline water thanks to its higher alkaline resistance. Its grain texture both gives it a decorative appearance and ease of application by ensuring a homogeneous distribution during roller application. It is used for creating a grained texture for top coat paint. An environment-friendly exterior coating.

Surface Preparation&Application
Dirty or loose parts for new surfaces and swells and dusty parts for surfaces with aged paint are removed. For the raw plastered surfaces excessive in lime, recommended to wash out the surface by mixing one-to-one ratio of vinegar to water before applying primer and paint. Cracks must be filled with Exelans Paste or A1 Exterior Paste. Recommended to apply single coat. Make sure that surface and air temperature is minimum +5°C and maximum +35°C during application. Do not apply under direct sunlight.

Thinning / Blending Ratio
Ready to use.

Coverage Area
1 to 1.5 square meters per kilogram for a single coat.

Drying Time
Completely dries in 1 to 3 hours at a temperature of 20°C. (Do not apply in temperatures below 5°C.)

Recommended Application Tools
Exterior Roller for spreading, Coral Roller for patterning.

Package
20 kg

Related Products
Exelans Flat VIEW DETAIL
A1 Silicone Flat VIEW DETAIL
Exelans Macro VIEW DETAIL
A1 Acrylic Flat VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.