Silicon resin-based, one-component, heat cured semi-matt top coat paint to protect surfaces exposed to high temperature. Applicable for up to 300°C temperature.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . Metal surfaces must be sanded at minimum Sa2 ½ (ISO 8501-1, SSPC-SP10) (sand blasting). Paint the sanded surface with Poli - Heat 300 in 1 to 2 hours. Thin the product according to the application equipment, than mix thoroughly until it becomes homogenous. Increase the temperature gradually and cure at 100°C for 1 hour - at 200°C for 1 hour and at 30°C for 1 hour.

Thinning / Blending Ratio
One component / Poly HRM thinner 10 - 15%

Coverage Area
12-14 m²/L or 8-10 m²/kg (25 - 30 µ DFT)

Drying Time
Touch dry in 1-2 hours and hard dry in 3 hours at high temperature.

Recommended Application Tools
Air - airless spray

15 L (metallic grey) - 20 kg

Related Products
Protectilat Acrylic Paint VIEW DETAIL
Polidur Polyurethane Matte Paint VIEW DETAIL
Polidur Polyurethane Glossy Paint VIEW DETAIL
Biopox Epoxy Antibacterial Paint VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.