Acrylic resin-based, one-component glossy top coat paint with high UV and yellowing resistance. Owing to create a flexible film, it is highly durable to scratches and impacts. Non-yellowing.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . Metal surfaces must be sanded at minimum Sa2 ½ (ISO 8501-1, SSPC-SP10) (sand blasting). Sanded surface must be primed with Epoxy Anticorrosive or Polyurethane Anticorrosive Primer in 6 hours. After the primer has dried (in 4 to 6 hours), apply 1K Pur-Acryl Acrylic Top Coat paint. The paint diluted to the application viscosity with the proposed diluent is thoroughly mixed until homogeneous. Rest the mixture for 2 to 3 minutes and apply with the recommended apparatus. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Do not apply near dew point or on wet, moist surfaces. For the topcoat application wait for 24 hours between coats. Application Temperature: Min. +10 °C/ Max. + 30 °C

Thinning / Blending Ratio
One component / Acrylic thinner 30 - 40%

Coverage Area
9-10 m²/L or 7-8m²/kg (50 - 60 µ DFT)

Drying Time
Touch dry in 2-3 hours and completely dry in 24 hours.

Recommended Application Tools
Air - airless spray

18 kg

Related Products
Poli HT Oven Drying 120 VIEW DETAIL
Poli-Heat 300°C VIEW DETAIL
Polidur Polyurethane Glossy Paint VIEW DETAIL
Pur-Acryl Matte Paint VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.