One-component, quick-dry, PVB and epoxy resin-based, high quality primer to protect steel, aluminum and galvanized surfaces against corrosion.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . Metal surfaces must be sanded at minimum Sa2 ½ (ISO 8501-1, SSPC-SP10) (sand blasting), prime the sanded surface with 1 K Corrox Primer in 6 hours. After the primer has fully dried (in 4 to 6 hours), the last coat can be applied. Apply after mixing the thinned product according to the application equipment thoroughly until it becomes homogenous. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Do not apply near dew point or on wet, damp surfaces. For the topcoat application wait for 24 hours between coats. Application Temperature: Min. +10°C / Max. + 30°C

Thinning / Blending Ratio
One component / Epoxy thinner 30 - 40%

Coverage Area
4-5 m²/L or 3-4 m²/kg (40 - 60 µ DFT)

Drying Time
Touch dry in 2-3 hours and hard dry in 24 hours.

Recommended Application Tools
Air - airless spray

Package
18 kg

Related Products
Rapid Primer VIEW DETAIL
Unipox Epoxy Primer VIEW DETAIL
Epoxy Zinc 45 Primer VIEW DETAIL
Epoxy Anti-Corrosive Primer VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.