TSE

Water-based, extra matte, highly covering lux plastic interior paint.

Surface Preparation&Application
All surfaces must be smooth, dry and cleaned of dirt and dust. Cavities and cracks should be filled and a uniform flat surface can be achieved by applying PERLA MACUN (Putty). If the surface has solvent based paint, TRANSFER ASTARI (Primer) should be applied. DOLGULU ASTAR should be applied on mineral based low absorbing non-dusting raw surfeces as a single coat. A-STAR or POLİZOLAN should be applied on the surfaces which have the application of plaster to prevent dust emission. It should be applied to surfaces in two coats after 18-24 hours of application of primer. On between coats, should be waited at 2-4 hours. The ambient and surface temperature should be between 5-30°C during application.

Thinning / Blending Ratio
25-30% by volume with water.

Coverage Area
12-14 m²/L. for a single coat

Drying Time
At 20°C, touch dry in 15 minutes, dust dry in 30 minutes

Recommended Application Tools
Apply with a satin roller, interior façade roller and brush.

Package
2.5 L - 7.5 L - 15 L

Related Products
Primera Silicone Matte VIEW DETAIL
Elegans Extra Soft Matte VIEW DETAIL
Perla Matte VIEW DETAIL
Perla Silicone Matte VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.