Alkyd resin-based, fast drying, durable industrial paint primer with good adhesion.

Surface Preparation&Application
Surfaces should be cleaned of old paint film, oil, dust, dirt, moist, chloride, sulphate salts, rust, rolled mud, tempering, casting - welding burrs etc. which will reduce adhesion on the application surface . Metal surfaces must be sanded at minimum Sa2 ½ (ISO 8501-1, SSPC-SP10) (sand blasting), prime the sanded surface with Perla Industrial Primer in 6 hours. Apply after mixing the thinned product according to the application equipment thoroughly until it becomes homogenous. After the primer has fully dried (in 4 to 6 hours), the finishing coat paint can be applied. The surface temperature must be minimum 3 Celsius degrees higher than the dew temperature. Application at temperatures near the dew point is not recommended. For the topcoat application wait for 24 hours between coats. Application Temperature: Min. +10°C/ Max. + 30°C

Thinning / Blending Ratio
One component / Polisel Cellulosic & Poli HRM thinner 15 - 20%

Coverage Area
5-6 m²/L or 3-4m²/kg (60 - -80 µ DFT)

Drying Time
Touch dry in 20-30 minutes and hard dry in 24 hours.

Recommended Application Tools
Air - airless spray

15 kg - 18 kg - 20 kg - 24 kg

Related Products
Poli HT Kiln Primer VIEW DETAIL
Rapid Primer VIEW DETAIL
Unipox Epoxy Primer VIEW DETAIL

Sitemizin işlemesini sağlamak için çerezler kullanılmaktadır. Detaylı bilgi almak için Polisan Kansai Çerez Aydınlatma Metni'ni incelemenizi rica ederiz.